韓國工程POM Kepital F30-03 產品特性：低粘度，高流動性，表面成型好，適合薄壁產品用
我公司提供的產品均為正牌塑膠原料，品質保證，貨源穩定，送貨上門，可免費提供官方物性表、UL黃卡，并隨貨提供RoHS報告、SGS報告等，索取權威資料請致電13268582149
POM F30-03 物性表：
| Specific Gravity | 1.41 | g/cm³ | ASTM D792 |
| Density | 1.41 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 27 | g/10 min | ASTM D1238 |
| Melt Mass-Flow Rate (MFR) | 28 | g/10 min | ISO 1133 |
| Molding Shrinkage - Flow (3.00 mm) | 2.0 | % | ASTM D955 |
| Molding Shrinkage (3.00 mm) | 2.0 | % | |
| Water Absorption (Equilibrium, 23°C, 60% RH) | 0.22 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
| Tensile Strength (Yield, 23°C) | 62.0 | MPa | ASTM D638 |
| Tensile Stress (Yield, 23°C) | 65.0 | MPa | ISO 527-2 |
| Tensile Elongation (Break, 23°C) | 40 | % | ASTM D638 |
| Nominal Tensile Strain at Break | 25 | % | ISO 527-2 |
| Flexural Modulus (23°C) | 2650 | MPa | ASTM D790 |
| Flexural Modulus (23°C) | 2700 | MPa | ISO 178 |
| Flexural Strength (23°C) | 91.0 | MPa | ASTM D790 |
| Flexural Strength (23°C) | 90.0 | MPa | ISO 178 |
| Shear Strength (2.00 mm) | 55.0 | MPa | ASTM D732 |
| Impact | Nominal Value | Unit | Test Method |
| Charpy Notched Impact Strength | 5.5 | kJ/m² | ISO 179 |
| Notched Izod Impact (3.20 mm) | 59 | J/m | ASTM D256 |
| Hardness | Nominal Value | Unit | Test Method |
| Rockwell Hardness (M-Scale) | 80 | ASTM D785 | |
| Thermal | Nominal Value | Unit | Test Method |
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 158 | °C | ASTM D648 |
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 110 | °C | ASTM D648 |
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 101 | °C | ISO 75-2/A |
| CLTE - Flow (20 to 80°C) | 0.00013 | cm/cm/°C | ASTM D696 |
| Electrical | Nominal Value | Unit | Test Method |
| Surface Resistivity | 1.0E+16 | ohms | ASTM D257 |
| Surface Resistivity | 1.0E+16 | ohms | IEC 60093 |