韓國工程POM Kepital F30-03 產品特性：低粘度，高流動性，表面成型好，適合薄壁產品用
我公司提供的產品均為正牌塑膠原料，品質保證，貨源穩定，送貨上門，可免費提供官方物性表、UL黃卡，并隨貨提供RoHS報告、SGS報告等，索取權威資料請致電13268582149
POM F30-03 物性表：
| Specific Gravity |
1.41 |
g/cm³ |
ASTM D792 |
| Density |
1.41 |
g/cm³ |
ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) |
27 |
g/10 min |
ASTM D1238 |
| Melt Mass-Flow Rate (MFR) |
28 |
g/10 min |
ISO 1133 |
| Molding Shrinkage - Flow (3.00 mm) |
2.0 |
% |
ASTM D955 |
| Molding Shrinkage (3.00 mm) |
2.0 |
% |
|
| Water Absorption (Equilibrium, 23°C, 60% RH) |
0.22 |
% |
ASTM D570 |
| Mechanical |
Nominal Value |
Unit |
Test Method |
| Tensile Strength (Yield, 23°C) |
62.0 |
MPa |
ASTM D638 |
| Tensile Stress (Yield, 23°C) |
65.0 |
MPa |
ISO 527-2 |
| Tensile Elongation (Break, 23°C) |
40 |
% |
ASTM D638 |
| Nominal Tensile Strain at Break |
25 |
% |
ISO 527-2 |
| Flexural Modulus (23°C) |
2650 |
MPa |
ASTM D790 |
| Flexural Modulus (23°C) |
2700 |
MPa |
ISO 178 |
| Flexural Strength (23°C) |
91.0 |
MPa |
ASTM D790 |
| Flexural Strength (23°C) |
90.0 |
MPa |
ISO 178 |
| Shear Strength (2.00 mm) |
55.0 |
MPa |
ASTM D732 |
| Impact |
Nominal Value |
Unit |
Test Method |
| Charpy Notched Impact Strength |
5.5 |
kJ/m² |
ISO 179 |
| Notched Izod Impact (3.20 mm) |
59 |
J/m |
ASTM D256 |
| Hardness |
Nominal Value |
Unit |
Test Method |
| Rockwell Hardness (M-Scale) |
80 |
|
ASTM D785 |
| Thermal |
Nominal Value |
Unit |
Test Method |
| Deflection Temperature Under Load (0.45 MPa, Unannealed) |
158 |
°C |
ASTM D648 |
| Deflection Temperature Under Load (1.8 MPa, Unannealed) |
110 |
°C |
ASTM D648 |
| Heat Deflection Temperature (1.8 MPa, Unannealed) |
101 |
°C |
ISO 75-2/A |
| CLTE - Flow (20 to 80°C) |
0.00013 |
cm/cm/°C |
ASTM D696 |
| Electrical |
Nominal Value |
Unit |
Test Method |
| Surface Resistivity |
1.0E+16 |
ohms |
ASTM D257 |
| Surface Resistivity |
1.0E+16 |
ohms |
IEC 60093 |
