羅地亞PA6 TECHNYL C 216 V30 產品特性：含30%玻璃纖維增強，潤滑，熱性能和機械性能的良好結合，用于汽車，電子電氣應用等

我公司提供的產品均為正牌塑膠原料，品質保證，貨源穩定，送貨上門，可免費提供官方物性表、UL黃卡，并隨貨提供RoHS報告、SGS報告等，索取權威資料請致電13268582149

PA6 C216V30 物性表：

Physical	Dry	Conditioned	Unit	Test Method
Density	1.35	--	g/cm³	ISO 1183
Density	1350	--	kg/m³	ISO 1183 2
Water Absorption (23°C, 24 hr)	0.95	--	%	ISO 62
Water Absorption (Equilibrium)	2.1	--	%	ISO 62 2
Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus	9600	6200	MPa	ISO 527-2/1A
Tensile modulus	9600	6200	MPa	ISO 527-2 2
Tensile Stress (Break)	190	110	MPa	ISO 527-2/1A
Tensile Stress (Break)	190	110	MPa	ISO 527-2 2
Tensile Strain (Break)	3.8	4.5	%	ISO 527-2/1A
Tensile Strain (Break)	3.8	4.5	%	ISO 527-2 2
Flexural Modulus	9500	5500	MPa	ISO 178
Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength	15	32	kJ/m²	ISO 179/1eA
Charpy notched impact strength (23°C)	15.0	31.5	kJ/m²	ISO 179/1eA 2
Charpy Unnotched Impact Strength	100	110	kJ/m²	ISO 179/1eU
Charpy impact strength (23°C)	100	108	kJ/m²	ISO 179/1eU 2
Notched Izod Impact Strength	14	24	kJ/m²	ISO 180/1A
Thermal	Dry	Conditioned	Unit	Test Method
Deflection Temperature Under Load (0.45 MPa)	217	--	°C	ISO 75-2 2
Heat Deflection Temperature (1.8 MPa, Unannealed)	205	--	°C	ISO 75-2/Af
Deflection Temperature Under Load (1.8 MPa)	205	--	°C	ISO 75-2 2
Glass Transition Temperature 3	55	--	°C	ISO 11357-2 2
Melting Temperature (DSC)	222	--	°C	ISO 3146
Melting Temperature 3	222	--	°C	ISO 11357-3 2
CLTE - Flow	0.000032	--	cm/cm/°C	ISO 11359-2 2
CLTE - Transverse (23 to 85°C)	0.000032	--	cm/cm/°C	ISO 11359-2
Electrical	Dry	Conditioned	Unit	Test Method
Surface Resistivity	1.0E+13	1.0E+11	ohms	IEC 60093
Surface resistivity	--	1.0E+11	ohms	IEC 60093 2
Volume Resistivity	1.0E+15	1.0E+11	ohm·cm	IEC 60093
Volume resistivity	1.0E+13	1.0E+9	ohm·m	IEC 60093 2
Relative Permittivity (1 MHz)	3.80	4.50		IEC 60250 2
Dissipation Factor	0.020	0.090		IEC 60250
Dissipation Factor (1 MHz)	0.020	0.090		IEC 60250 2
Comparative Tracking Index (Solution A)	550	475	V	IEC 60112