|
|||||||||||||||||||||||||||
| POM N2320-U03 德國巴斯夫公司 物性數據 |
| 規格級別： | 注塑級 | 外觀顏色： | --- |
| 用途概述： | --- | ||
| 備注說明： | --- | ||
| 性能項目 | 試驗條件[狀態] | 測試方法 | 測試數據 | 數據單位 | |
| 基本性能 | 熔融指數 | 220℃/10kg | --- | 7.5 | cm3/10min |
| 吸水率 | --- | --- | 0.8 | % | |
| 吸濕率 | --- | --- | 0.2 | % | |
| 密度 | --- | --- | 1400 | Kg/cm3 | |
| 物理性能 | 模縮率 | 水平方向 | --- | 2.1 | % |
| 機械性能 | 拉伸模量 | --- | --- | 2600 | MPa |
| 拉伸屈服強度 | --- | --- | 63 | MPa | |
| 屈服伸長率 | --- | --- | 9.6 | % | |
| 斷裂伸長率 | --- | --- | 29 | % | |
| 拉伸模量 | 1h | --- | 1800 | MPa | |
| Charpy沖擊強度 | 23℃ | --- | 200 | KJ/m | |
| Charpy沖擊強度 | 23℃ | --- | 5.5 | KJ/m | |
| 電氣性能 | 介電常數 | 100HZ | --- | 3.8 | --- |
| 體積電阻率 | --- | --- | 1E13 | ohm | |
| 表面電阻率 | --- | --- | 1E13 | Ohm | |
| 介電強度 | --- | --- | 40 | Kv/mm | |
| 熱 性 能 | 線膨脹系數 | 水平方向 | --- | 1.1 | E-4/℃ |
| 燃燒率 | 1.6mm | --- | HB | Class | |
| 熔點 | 10℃/min | --- | 167 | ℃ | |
| 熱變形溫度 | 1.80MPa | --- | 105 | ℃ | |
| 維卡軟化溫度 | 50℃/h50n | --- | 150 | ℃ | |
| 其它性能 | 氧指數 | --- | --- | 15 | % |
| 損耗角 | 100HZ | --- | 10 | --- | |
