|
|||||||||||||||||||||||||||||||
| PC 243R 美國通用電氣公司 物性數據 |
| 暫無此原料描述部分┄ |
| 性能項目 | 試驗條件[狀態] | 測試方法 | 測試數據 | 數據單位 | |
| 基本性能 | 密度 | --- | ASTM D-792 | 0.043 | lb/in3 |
| 吸水率 | --- | ASTM D-570 | 0.15-0.58 | % | |
| 熔體流動速率 | --- | ASTM D-1238 | 10.5 | g/10min | |
| 物理性能 | 模具收縮率 | --- | ASTM D-955 | 5-7 | in/inE-3 |
| 比重 | --- | ASTM D-792 | 1.20 | --- | |
| 阻燃性 | V-2 | UL 94 | 0.058 | inch | |
| 阻燃性 | V-0 | UL 94 | 0.240 | inch | |
| 機械性能 | 拉伸屈服強度 | --- | ASTM D-638 | 9000 | Psi |
| 拉伸斷裂強度 | --- | ASTM D-638 | 9500 | Psi | |
| 拉伸屈服伸長率 | --- | ASTM D-638 | 7 | % | |
| 拉伸斷裂伸長率 | --- | ASTM D-638 | 110 | % | |
| 屈服彎曲強度 | --- | ASTM D-790 | 13500 | Psi | |
| 屈服彎曲模量 | --- | ASTM D-790 | 340000 | Psi | |
| 壓縮強度 | --- | ASTM D-695 | 12500 | Psi | |
| 壓縮模量 | --- | ASTM D-695 | 345000 | Psi | |
| 剪切強度 | --- | ASTM D-732 | 6000 | Psi | |
| 剪切模量 | --- | ASTM D-4065 | 114000 | Psi | |
| 洛氏硬度 | --- | ASTM D-785 | 70 | M scale | |
| 洛氏硬度 | --- | ASTM D-785 | 118 | R scale | |
| IZOD無缺口沖擊強度 | 73H | ASTM D-4812 | 60 | ft-lb/in | |
| IZOD缺口沖擊強度 | 73H | ASTM D-256 | 15 | ft-lb/in | |
| 拉伸強度 | --- | ASTM D-1822 | 260 | ft-lb/in2 | |
| 電氣性能 | 體積電阻率 | --- | ASTM D-527 | >1017 | Ω.cm |
| 介電強度 | --- | ASTM D-149 | 380 | V/mil | |
| 介電常數 | 60Hz | ASTM D-150 | 3.17 | --- | |
| 損耗因數 | 1MHz | ASTM D-150 | 0.0100 | --- | |
| 介電常數 | 1MHz | ASTM D-150 | 2.96 | --- | |
| 損耗因數 | 60Hz | ASTM D-150 | 0.0009 | --- | |
| 熱 性 能 | 脆化溫度 | --- | ASTM D-746 | 200 | --- |
| 維卡軟化點 | --- | ASTM D-1525 | 310 | --- | |
| 熱變形溫度 | 66Psi | ASTM D-648 | 280 | --- | |
| 熱變形溫度 | 264Psi | ASTM D-648 | 270 | --- | |
| 熱傳導率 | --- | ASTM C-177 | 0.19 | W/m.c | |
| 其它性能 | 折射指數 | --- | ASTM D-542 | 1.586 | --- |
| 光傳送 | --- | ASTM D-1003 | 88 | % | |
| 混濁 | --- | ASTM D-1003 | 1.0 | % | |
| 磨損 | --- | ASTM D-1044 | 10 | mg/1000cy | |
| 氧指數 | --- | ASTM D-2863 | 25 | % | |
